This thesis is written at WSP management and investigates the practice of pre-project planning and Feasibility studies at Swedish construction companies, through the study of the ongoing feasibility study of the mall Sturegallerian in Stockholm, and through interviews with experienced project managers in the construction industry. There is currently a big span in the way Swedish construction companies plan the pre-project phase and the aim of this thesis is to present a more generic and standardized way that helps minimize project risks and maximize efficiency and profit. The result is a generic model which can be used in pre-project planning. The model describes the phases in the preproject planning process and the activities that span these phases. Is also describes the categories of professions that need to participate in the preproject planning group and which activities that each profession executes. The other result is a list of factors that need to be considered for a well performed pre-project phase, as found during the interviews. Among others the thesis stresses the importance of involving the client as a key participant in the process.

This thesis is a feasibility study for a future product development project. The purpose ofthis project is to evaluate the possibilities and difficulties associated with the design of anelectric power assist servo for all terrain vehicles (ATVs). The project has been carriedout in collaboration with Nira Control AB. Nira designs and manufactures electric andelectro mechanic products mainly for the motor sport market segment.Nira Control AB is developing a fuel injection system for a new line of large ATVs oncommission. To be able to compete with manufacturers like Yamaha and Honda thecommissioner should be able to offer optional power assist steering.

The study aims to investigate the feasibility of small-scale electricity production with solar electricity systems, also known as PV (photovoltaic) systems, in Australia. Due to the global warming, sustainable energy has in recent years become an increasingly important issue, both internationally and in Australia. With one of the largest dependencies on fossil energy sources in the world, the country's abundant solar radiation is a possible solution to this issue.Both the technical and the economic feasibility of small-scale PV systems were investigated. On the technological side, the electricity generation, distribution and consumption systems were studied. On the economical side, the parameters that drive the profitability of a PV investment were investigated.

The tourism industry in EU is one of the biggest sectors and employs about20 million people. A key factor of the industry is information, much oftourist information is today on the Internet. On Internet there is twoways information can flow, the information can either be pushed to aconsumer or the consumer of the Information can pull it from a source.In a feasibility study for the report the participants expressed thatthey thought the tourist information on the Internet was unpersonal anddidnt fill their informationneeds. The purpose of the report was to findout how push and pull of touristinformation can be balanced on Internet.The empirical data was collected with a feasibility study, a survey anda case. The survey was conducted at IT-University and School of Business,Economics and Law at Göteborg.

This report summarizes a Bachelor Degree Project in Integrated Product Development,carried out during the spring semester in 2007 by three students at the Product Design Engineering programme at the University of Skövde. The project was performed as an assignment for KinBag ab, a sister subsidiary to Kinnegrip ab in Lidköping, who develop,manufacture and market the golf bag KinBag, a bag with an integrated wheel carriage system. The purpose of the project was to redesign the golf bag to attract a target group consisting of golfers aged between 20 and 40.The layout of the project was as follows: The project began with a feasibility study where different problems were identified with the basis of a market research which eventually was summarized in a dynamic specification of requirements. The feasibility study was followed by a generation of ideas which contained everything from sketches to simple mock-ups with an intensive amount of thoughtful brainwork and information gathering in between. This ledto the development of a number of design concepts, both on an overall level and on different parts of the golf bag.

The energy in laundry rooms, in form heated air, can be utilized with a heat exchanger. A concept and an early prototype of the heat exchanger have already been developed to show that the theory works. This report describes the continued development and construction of the product.A field study was made in order to investigate the environmental usage and establish the product design. The most common washing machine was used as a calculation model, and calculations were also made to estimate the amount of energy in the air. A previous analysis of the existing prototype is also presented in this report, to show the products potential capacity.

Choosing the right user experience evaluation method can be difficult, choosing the right one for mobile user experience can be even more so. One major cause is that mobile usage is context dependent. Another contributing factor is that there is not one widely adopted theory or framework for user experience due to its complexity.The purpose of this study was to evaluate an existing method artifact in its feasibility for evaluating mobile applications. The chosen method, AttrakDiff2 is a self-reporting semantic differential questionnaire to evaluate the user experience of an interactive product, based on its hedonic and pragmatic qualities.A study was conducted where the participants assessed one mobile and one web application, which were later rated with AttrakDiff2. The completion of the questionnaire was conducted as a think-aloud session subsequently followed by an interview.The results suggest that the participants experience was affected more by the evaluated application style than the different platforms.

By our employer Camatec Industriteknik AB have we been given the assignment to continue with the previous work ?Design of strip feeder?. Our goal with this work is to come up with a design basis for a strip feeder.Functionally a strip feeder consists of two rollers which with the aid of the friction between the strip and the coating on the roller create a strip force that pulls the strip through the working progress.Demands on this project:? 10 ? 600 mm in strip width and 0,1-1 mm in strip thickness.? Minimum 30m/min in production speed.? A maximum strip force on 30-40 kN.? The cost of the strip feeder?s components is to be considered of economy and quality.The need of a strip feeder occurs when the coil doesn?t manage to feed or pull the strip before or after a working process. The strip can otherwise be exposed by a permanent yield deformation or a change in the strip material if it?s pulled trough the working process only by the on ? and of-coils.

The present thesis deals with Qur'anic Studies among Turkish immigrants inSweden. The aim is to investigate the significance of Qur'anic Studies forMuslims in a country like Sweden. This thesis also highlights the role ofthe Turkish state in encouraging and funding Qur'anic Studies in Sweden.I have carried out a case study on a Mosque outside Stockholm, where anImam, sent by the Turkish government, is in charge of the Qur'anic Studies.It is found that Qur'anic Studies is important for Muslims in Sweden in theirefforts to preserve their religious identity. The results also indicate thatQur'anic Studies also has an ideological dimension insofar as it is a meansfor Islamic governments, groups and individuals to further the interests of political Islam..

The purpose of this review was to investigate in scientific literature what impact clinical supervision actually contains from the perspective of the working conditions for nursingstaff. Goodman formed the working process in our review and is based on a systematic scrutiny and analysis of ten scientific articles inspired of evidencebased method. Willman & Stoltz and Pearson's FAME scale was used sifting through evidence of the articles.The result has been divided thematic in professional development, personal development, development of knowledge, communicationskills, feeling of fellowship, working environment and the patientinteraction. The conclusion of the evidens grading (A-D), in the quantitative results, showed no evidens (D). The qualitative articles was graded (1-5) through the concepts Feasibility, Appropriatness, Meaningfulness and Effectiveness.

This is a feasibility study that examines various aspects of building a wind farm on Malmön in Norrköping. The feasibility study deals with interests of conflict, park design, electrical connections, production calculation, financial calculations and operating- and timetable.The report is divided into two distinct parts. First a theoretical part, which deals with conflicting interests, park design and electrical connections. Second a part with simulations dealing with production calculations, and financial calculations.Opposing interests are mapped so that problem areas can be found, and help put focus on the right places at a future environmental impact assessment (EIA). There are a number of areas where planners have to assess on an EIA, this thesis point on the most important areas.

The background for this degree thesis is a need to replace the existing seal used to protect equipment containing secret or sensitive equipment used by Swedish Defence. The target design should satisfy both the need for tamper evidence and reduce Life Cycle Cost. In developing a new design for a seal, additional benefits such as improved logistics support and indication of attack methods such as heat and solvents have been considered.The lack of guiding principles for end users of seals became evident during the interviews. Major concerns for the future are education of users, information about actions if a seal is broken and user liability.The design work was divided into several phases. A feasibility study was performed including investigation of theory of labels, materials and possible technologies.

This Masters thesis concerns difficulties experienced by Gender Studies researchers in an information seeking context. The aim is to identify, and study the cause of, these potential difficulties by asking the following questions: How do researchers in Gender Studies seek information? What difficulties may arise when information seeking is carried out in Gender Studies? What may be the cause of these difficulties? What does Gender Studies consist of? In order to find feasible answers to these questions, particular attention is paid to the context in which the researchers exist and work. The database KVINNSAM serves as an example of how libraries have tried to overcome barriers in information seeking in Gender Studies. The method used is a qualitative one based on interviews and literature studies.

Vattenfall Heat AB is a district heat provider in Drefviken, but has yet to establish any cooling systems in this area. This thesis examines the potential client base within the area today and over the coming 20 years. The feasibility of the most common cooling technologies is evaluated and results show a total potential for an installed capacity of 30 MW providing 50 GWh of cooling per year. One of the examined areas shows good prospect for heat driven absorption chillers during the summer months when the heat load is limited..

This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde, first semester 2007. The assigner was Tibrokök in Tibro, Sweden. The commission was originally to design a sliding door concept for kitchen. Later it was expanded to also include bathrooms.During the feasibility study of the project Internet was used as an information source. Kitchen brochures and magazines were ordered from different companies to give inspiration and ideas.